Energy Saving With Direct Drive Blower Packages
EXPERTISE IN PRESSURE

Most companies overlook the amount of energy consumed by blower systems. Vacuum, Pump, & Compressor understands that decreasing energy consumption is crucial to your bottom line. VPC-SCD blower packages not only save substantial amounts of energy, but are reliable, engineered products that require less maintenance time and parts.

Benefits

  • Save 5% in energy with no belt friction losses
  • Lower maintenance – No re-tightening or replacement of belts
  • Increase blower bearing life up to 3 times by eliminating side torsional loading
  • High torque at low RPM for starting under load
  • Lessen blower failures

CUSTOM PACKAGES

The VPC-SCD allows for a wide pressure operating range to maximize energy savings as your plant demand changes. Each blower package is custom engineered to fit your requirements and manufactured in Green Bay, WI.

High Efficiency Screw Blowers

Features

  • Patented, highly-efficient 3×5 helical screw rotor profile
  • Food-grade PTFE (Polytetrafluoroethylene) coated rotors
  • Exclusive split-cylinder design and available discharge port designs  matches the most efficient performance to your application requirements
  • High pressure capability up to 36 psi
  • O-ring sealing
  • Helical Timing Gears
  • Unique Dual Splash Lubrication with eccentric slinger ring
  • Force Feed Lubrication optional for applications under 20 psi, required for applications over 20 psi
  • Inpro/Seal Premium Oil Seals
  • Mechanical Seals also available for gas applications
  • Piston Ring or Graphite Air Seals
  • Robust Ductile Iron Shaft
  • Available as bare blower for upgrading existing packages

Benefits

Patented Design

  • Patented, highly-efficient 3×5 helical screw rotor profile provides a competitive advantage for you
  • Food-grade PTFE (Polytetrafluoroethylene) coated rotors minimize air loss while maximizing efficiency
  • Exclusive split-cylinder design matches performance to your application requirements
  • Three discharge port options optimize efficiencies based on your specific performance needs
  • High pressure capability for dense phase conveying applications

Bi Lobe Blowers

Design Advantages

  • Sutorbilt Legend PD blowers are capable of reliably handling continuous loads
  • Alloy steel timing gears assures non-slip timing under the most strenuous conditions
  • Gear and bearing lubrication provides superior blower life
  • High strength drive shaft provides greater blower durability and installation flexibility
  • High strength cylinder with heat dissipating fins for reduced noise and vibration
  • High temperature seals provide leak-free operation in severe-duty applications
  • Available with Dual Splash Lubrication (DSL) and mechanical seals for gas applications
  • Universal feet for both horizontal or vertical installations
  • Cooler operating temperature to extend blower life

Specifications/Performance

  • Airflow Range to 3,000 cfm (5,000 m3/h)
  • Pressure to 15 psig (1.034 bar)
  • Vacuum to 16″ Hg (542 mbar)
  • 25 models available

Straight Tri-lobe

Features

  • Involute three-lobe rotor profile
  • Single piece cylinder
  • High strength, durable shaft
  • Dual splash lubrication
  • Piston ring seals
  • Helical timing gears
  • Long life, reinforced roller bearings
  • Horizontal and vertical mounting configurations available
  • Backed by local network of experienced and trusted sales and service professionals

Benefits

  • Solid Tri-Lobe rotors offer quiet, efficient operation
  • Robust design for reliability
  • Flexible mounting options for easy drop-in replacement
  • Dual splash lubrication for reduced maintenance intervals and superior durability
  • 100,000 hour bearing life

Regenerative Blowers

Regenerative blowers are used in a broad range of applications.

sewage aeration – vacuum lifting – vacuum packaging – packaging equipment – printing presses – aquaculture/pond aeration – spas – dryers – dust / smoke removal – industrial vacuum systems – soil vapor extraction.

Anywhere high airflow and low vacuum / pressure is required.

Single impeller - Single stage

Integral motor design versions
Aluminum Construction
Capacity up to 602 cfm(50Hz) / 726 cfm(60Hz)
Ambient temperature from +5 to +104°F

Pressure Applications:
Maximum Flow to 726 cfm Maximum pressure to 211 inWg

Vacuum Applications:
Maximum Flow to 726 scfm Maximum pressure to 11.1  inHg

Twin impeller - Double stage

Integral motor design versions
Aluminum Construction
Capacity up to 593 cfm(50Hz) / 716 cfm(60Hz)
Ambient temperature from +5 to +104°F

Pressure Applications:
Maximum Flow to 716 cfm Maximum pressure to 241 inWg

Vacuum Applications:
Maximum Flow to 716 scfm Maximum pressure to 14.7 inHg

Single impeller - Double stage

Integral motor design versions
Aluminum Construction
Capacity up to 278 cfm(50Hz) / 336 cfm(60Hz)
Ambient temperature from +5 to +104°F

Pressure Applications:
Maximum Flow to 336 cfm Maximum pressure to 300 inWg

Vacuum Applications:
Maximum Flow to 336 scfm Maximum pressure to 14.7 inHg

Contact Us